Roland MMP-2 Supplementary Manual

Roland mmp-2 mic modeling preamp: supplementary guide

Hide thumbs Also See for MMP-2:

About the Phantom Power of the MMP-2

The phantom power source of MMP-2 can drive Condenser Microphones

with electrical specification 6.0mA or lower at 48V. Microphones that require

more ampere is not supported. Please use phantom power supply devices

separately.

Please see owner's manual of microphones regarding specification or

conditions of use.

Phantom power is not supplied to 1/4 inch TRS phone jacks. If your

microphone requires phantom power, please connect it to XLR jacks.

Please turn the volume of the audio mixer down (off) before switching

the phantom power function on/off on the MMP-2. This will prevent any

damage to your amp and speakers, as a loud noise will be output from the

MMP-2 when phantom power is switched on/off.

40457423

4*REC

Table of Contents

Do you have a question about the MMP-2 and is the answer not in the manual?