Using a Manual Fit Line
Tutorial Overview
In this tutorial, you will learn how to use a manual fit line with the TI-84 Plus Graphing Calculator.
Action
Step 1: Press STAT and select EDIT.
Step 2: Enter data in List 1 and List 2.
nd
Step 3: Press 2
At this point, you can see if the plots are on or off.
All plots should be off except the one with which
you are working.
Step 4: Press GRAPH.
Step 5: All the data points may not be visible and
the window will need to be changed.
Press WINDOW to change the window settings.
You can change the minimums and maximums to
include all the data points.
©
2014 Texas Instruments Incorporated
CL3701.5
STAT PLOT (this is the Y= key).
T
UTORIALS FOR THE
Screens
1
TI-84
F
PLUS
AMILY
education.ti.com