Panel Descriptions; Control Section; Channel Control - Roland KC-350 Owner's Manual

Panel Descriptions

Control Section

fig.20

1. CHANNEL CONTROL

Stereo 4-channel mixing is offered by the CHANNEL
CONTROLs.
* When using in "Stereo Link" configuration, refer to "Stereo
Link" (p. 12).
CH 1, CH 2, CH 3
These adjust the volume levels for CH 1, CH 2 and CH 3.
CH 1 accepts the mic input.
CH 4
This adjusts the volume level for CH 4.
CH 4 includes a select switch that lets you choose the
destination for output.
OUTPUT SEL (output select) Switch
This switch selects the combination of outputs—
headphones, speakers, and line outs—to which signals
input to CH 4 are sent.
Output is through the headphones and the internal
speakers. No signals are output to Line Out.
Output is only through
the headphones. No
signals are output to
the internal speakers
and Line Out.
6
1
Output is through
the headphones, the
internal speakers,
and Line Out.
2
* The OUTPUT SEL switch is convenient in situations like the
following.
: Select this position when you wish to listen to guide
clicks or a rhythm machine (for example) through
headphones, without output to the internal or any
external speakers.
: This can be a handy function when you want to use the
amplifier as a fold back monitor during a live
performance.
This is effective in preventing the loop noise that may
occur at times such as when the CH 4 input and Line
Out on the KC-550/KC-350 are both connected to a
mixer.
: Use CH 4 equally with CH 1 through CH 3.
PHONES
PHONES VOLUME Knob
This knob adjusts the headphone volume.
* The PHONES VOLUME knob affects only the headphone
output.
PHONES Jack
This is for connecting headphones.
* The amplifier's speakers work even when headphones are
connected.
* Before plugging in or unplugging headphones, be sure to place
the PHONES VOLUME knob at 0.
* The MASTER CONTROL (Equalizer, SHAPE switch and
VOLUME knob) do not affect the headphone output.
3 4