Argos 483/2669 Assembly Instructions Manual page 6

Assembly Instructions
Step 3
Extending the legs and
secure the canopy
a: Pull and extend each
leg until the spring clips
engage into the hole in
the outer tubes.
Note: There are two
spring clip location holes
in each leg, using the
holes can adjust the height
of Gazebo.
b: Attach the hooks on the
end of the canopy legs to
the holes at the end of the
frame leg,the canopy
cover can be tightened
by moving the hooks to
a lower hole.
C: close the velcro tape
as shown in diagram c.
Warning: the velcro tape
must stretch tight as this
could cause rain water to
collect on the canopy and
a hazard.
3
a:
Spring clip
c:
b:
Leg
Hook
1
2
5