Precautions When Connecting And Turning On The Power; Connection Example - Roland Edirol MA-15D Owner's Manual

Connections
Attaching the Rubber Feet
(Included)

Connection Example

INPUT
(FROM RIGHT)
OUTPUT
(TO LEFT)
Sound Module, CD Player, MD Player, etc.
Precautions When Connecting
and Turning on the Power
921
• To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power on
all devices before making any connections.
926a modify
• Using a connection cable that contains a resistor can cause the
sound level to be low. Use a connection cable that does not
contain a resistor.
941
• Once the connections have been completed, turn on power to
your various devices in the order specified. By turning on devices
in the wrong order, you risk causing malfunction and/or damage
to speakers and other devices. (When turning the power off,
reverse this procedure.)
< Connected devices → MA-15D>
942
• This unit is equipped with a protection circuit. A brief interval (a
few seconds) after power up is required before the unit will
operate normally.
945
• If you need to turn off the power completely, first turn off the
POWER switch, then unplug the power cord from the power
outlet. Refer to Power Supply (p. 5).
Rear Panel
select
7