Welcome; System Requirements Windows - Roland Ver. 4.5 User Manual

Welcome

Welcome to the User Guide for the Roland ColorChoice® RIP Software. We recommend that you read and
understand this document. This document contains instructions for the Apple® Macintosh® and the
Microsoft® Windows® 95/98/ME, Windows® 2000 and Windows NT®.

System Requirements Windows

The following table lists the minimum and high volume recommended system setup to run RIP Software.
System requirements vary according to the size of the files to be scanned and printed, the output device used,
and other variables. Your particular setup and intended use of the software determine what hardware and
software setup you need to get the most out of RIP Software. If you are working with relatively small files, the
minimum setup may be sufficient. Similarly, if you are working with large files, you should consider the
recommended setup. Consult your dealer for advice when choosing a system.
Processor
RAM
Install Space
Working Disk
Space
Operating System
Video
Others
Parallel
Network (*2)
(*1) Windows NT 4.0 requires Internet Explorer 4 or greater & Service Pack 4 or higher.
(*2) Only when printers with network capabilities are used. TCP/IP should be installed and working properly.
Minimum
Pentium® II 233MHz
128MB
200MB
2GB
Running latest version of: Windows95
OSR2 / Windows 98/ ME / NT 4.0(*1) /
2000
800 x 600 screen resolution with 16 bit
color
4x CD-ROM Driver
ECP Capable
10 BASE-T
Recommended
Pentium II 400MHz or faster
256MB or more
200MB
4GB or more for storage
Running latest version of: Windows98 /
ME / NT 4.0(*1) / 2000
1024 x 768 screen resolution with 16 bit
color
16x CD-ROM Driver
ECP Capable
100 BASE -TX
5