LS&S 101085 Setting Instructions

ONE BUTTON ANALOG TALKING WATCHES
With Date and Alarm Functions
Models 101085, 101086
Setting Instructions
Keys: TR = Top Right button
BR = Bottom Right button
(This Bottom Right button is recessed and can be accessed using a pen tip)
YOUR WATCH SHOULD ARRIVE WITH THE TALKING VOICE IN SLEEP MODE TO PRESERVE THE
TALKING BATTERY LIFE. TO ACTIVATE THE TALKING FEATURES, PRESS AND HOLD THE TR
BUTTON FOR 5 SECONDS UNTIL YOU HEAR A BEEP. THIS WILL TURN THE TALKING FEATURE
ON. If you want to turn the talking features off altogether in the future, press and hold this TR
button again for 5 seconds until you hear a beep.

Setting Analog Time:

1) Remove the protective plastic tab, by gently pulling out the stem.
2) With the stem pulled out, turn it to adjust the hour and minute hands to the desired
time.
3) Lock in this time by pushing in the stem. The analog time will NOT advance if the stem is
not pushed back in. DO NOT turn the stem unless it's pulled out, as this will damage the
watch.

Setting Talking Time:

1) Using a pen tip, paperclip tip, or other small pointed object, press the recessed BR
button to enter the Hour Set mode. You will hear "Set Hour."
2) Press the TR button the desired number of times to advance the hour.
3) To set the minutes, press the recessed BR button 2 times. You will hear "Set Minute."
4) Press the TR button the desired number of times to advance the minutes.

Announcing the Current Time:

1) Once the time is set, simply press the TR button and the current time will be announced.

Setting Talking Date

1) To set the year, press the recessed BR button 3 times. "Set Year" is announced.
2) Press the TR button repeatedly to advance to the correct year.
(Near the "2")
(Near the "4")
Page 1 / 2