Flymo Contour 500E Original Instructions

Guarantee & Guarantee Policy
If any part is found to be defective due to faulty manufacture within
the guarantee period, Husqvarna Australia PTY/Husqvarna New
Zealand Ltd., through its Authorised Service Repairers will effect the
repair or replacement to the customer free of charge providing:
(a) The fault is reported directly to the Authorised Repairer.
(b) Proof of purchase is provided.
(c) The fault is not caused by misuse, neglect or faulty adjustment by
the user.
(d) The failure has not occurred through fair wear and tear.
(e) The machine has not been serviced or repaired, taken apart or
tampered with by any person not authorised by Husqvarna Australia
PTY/Husqvarna New Zealand Ltd.
(f) The machine has not been used for hire.
(g) The machine is owned by the original purchaser.
(h) The machine has not been used commercially.
* This guarantee is additional to, and in no way diminishes the
customers statutory rights.
Failures due to the following are not covered, therefore it is important
that you read the instructions contained in this Operator's Manual and
understand how to operate and maintain your machine:
Replacement Parts
Spool and Line
Reference: 500E FLY021
580E 650E FLY061
Environmental Information
• Awareness of the environment must be considered when disposing
of 'end-of-life' product.
• If necessary, contact your local authority for disposal information.
The symbol on the product or on its packaging indicates that
this product may not be treated as household waste. Instead it shall
be handed over to the applicable collection point for the recycling of
electrical and electronic equipment.
Technical data
Type
Width of Cut (cm)
Speed of Rotation of Cutting Device (rpm)
Measured Sound Power L (dB(A))
WA
Guaranteed Sound Power L (dB(A))
WA
Sound pressure L (dB(A))
pA
Uncertainty K (dB(A))
pA
Hand / arm vibration a (m/s )
2
h
Uncertainty K (m/s )
2
ah
Weight (kg)
Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice.
Copyright © 2015 Flymo S.A. All rights reserved. Flymo
unregistered trademarks of Flymo S.A.
5857342-02
5857342-02 Contour 500E-580E-650E AU/NZ.indd 1
Failures not covered by guarantee
* Replacing Nylon Line.
* Failures as a result of not reporting an initial fault.
* Failures as a result of sudden impact.
* Failures as a result of not using the product in accordance with the
instructions and recommendations contained in this Operator's
Manual.
* Machines used for hire are not covered by this guarantee.
* The following items listed are considered as wearing parts and their
life is dependent on regular maintenance and are, therefore not
normally subject to a valid warranty claim: Nylon Line, Spool and
Line, Electric Mains Cable
* Caution!
Husqvarna Australia PTY/Husqvarna New Zealand Ltd. does not
accept liability under the warranty for defects caused in whole
or part, directly or indirectly by the fitting of replacement parts or
additional parts that are not either manufactured or approved by
Husqvarna Australia PTY/Husqvarna New Zealand Ltd., or by the
machine having been modified in any way.
Part no.: 513937190
Part no.: 510245990
By ensuring this product is disposed of correctly, you will help prevent
potential negative consequences for the environment and human
health, which could otherwise be caused by inappropriate waste
handling of this product.
For more detailed information about recycling of this product, please
contact your local council office, your household waste disposal service
or the shop where you purchased the product.
CTE25 CTE27 CTE30
25 27
11,500 9,800
92 91
96 96
80.3 79.3
2.5 2.5
2.0 3.6
1.5 1.5
3.1 3.2
® and other product and feature names are registered or
Husqvarna AB
S-561 82 Huskvarna
Sweden
06/2015
30
8,500
90
96
80.1
2.5
3.0
1.5
3.4
Contour
®
500E/580E/650E
Original Instructions
14.06.15 11:25