Graphic Driver - DAQ system cPCI-SBC02 User Manual

Only DeskTop Monitor Installation when not including LCD
When Installation Graphic Driver and re-booting, windows logo display shows at
DeskTop Monitor as like below picture.
After logo display disappear, do not show nothing at DeskTop Monitor because a
graphic driver outputs a display at initial setup LCD.
At this time, press [Ctrl] + [Art] + [F1] one minute later, a display outputs at Monitor.
This setup needs a setting of once when install window.
18-
-
cPCI-SBC02 Board User manual
http://www.daqsystem.com