Recommended Memory Cards; Midi Implementation - Roland SP-404 Owner's Manual

Appendices
Message
rEC (Recording)
rEh (Rehearsal)
S.oF (Send/Return mode off)
S.on (Send/Return mode on)
SAV (Backup Save)
trC (Truncate)
UnS (Unsupported format)
WAV

Recommended Memory Cards

As of the date of writing, Roland has confirmed that the following memory cards work correctly with the SP-404.
Manufacturer
BUFFALO
HAGIWARA SYS-COM
I•O DATA
SanDisk
* Supported capacities: 32 MB, 64 MB, 128 MB, 256 MB, 512 MB, 1 GB

MIDI Implementation

Model: SP-404
Date: July 12, 2005
Version: 1.02
1. Receive data
■Channel Voice Messages
* For the correspondence between note numbers and pads, refer to "MIDI on the SP-404"
(p. 41).
●Note Off
Status 2nd byte
8nH kkH
9nH kkH
n = MIDI channel number: 0H - FH (ch.1 - ch.16)
kk = note number: 2EH - 76H (46 - 118)
vv = note off velocity: 00H - 7FH (0 - 127)
●Note On
Status 2nd byte
9nH kkH
n = MIDI channel number: 0H - FH (ch.1 - ch.16)
kk = note number: 2EH - 76H (46 - 118)
vv = note on velocity: 01H - 7FH (1 - 127)
■Channel Mode Messages
* If the following channel mode message is received during realtime recording, note-off
messages will be generated for all notes on the corresponding channel that are currently
on, and those note-off messages will be recorded.
●All Sounds Off (Controller number 120)
Status 2nd byte
BnH 78H
n = MIDI channel number: 0H - FH (ch.1 - ch.16)
* If the All Sound Off message is received, all notes will be silenced regardless of their
channel.
50
Meaning
Sampling. Resampling. Recording a pattern.
Rehearsal mode during pattern recording.
Send/Return mode is off.
Send/Return mode is on.
Backup data will be saved.
Sample will be truncated.
The operation was cancelled because the WAV or AIFF is in a format not supported by the SP-404.
When exporting an audio file, it will be exported in WAV format.
Model
RCF-G (256 MB, 1 GB), RCF-X (32 MB, 64 MB, 128 MB, 512 MB)
Zpro: HPC-CF128ZP (128 MB), HPC-CF512ZP (512 MB), HPC-CF1GZP (1 GB)
CFS-32M (32 MB)
ultra II: SDCFH-256-903 (256 MB), SDCFH-512-903 (512 MB), SDCFH-1024-903 (1 GB)
3rd byte
vvH
00H
3rd byte
vvH
3rd byte
00H
■System Common Message
●Song Position Pointer
Status 2nd byte
F2H mmH
(mm ll: 00 00H - 7F 7FH (0 - 16383))
* This message is received if Sync Mode is AUTO.
■System Realtime Message
●Timing Clock
Status
F8H
* This message is received if Sync Mode is AUTO or TEMPO.
●Start
Status
FAH
* This message is received if Sync Mode is AUTO.
●Continue
Status
FBH
* This message is received if Sync Mode is AUTO.
●Stop
Status
FCH
* This message is received if Sync Mode is AUTO.
●Active Sensing
Status
FEH
3rd byte
llH