Waterpik WP-480 Quick Start Manual

For Showerpik
1
Charge battery pack for
24 hours before first use
Plug charger into standard
1
electrical outlet (1). Line up
arrow on the battery pack
with arrow on the charger
labeled "insert" and insert
2
battery pack (2). Rotate
charge
Insert
battery pack until arrow
lines up with arrow labeled
"charge" (3). Green light on
3
the charger will illuminate.
charge
Insert
3
Insert Tip:
Select the appropriate tip and insert
into the unit. Press firmly until the tip
clicks into place. Gently pull on tip to
confirm it is seated
properly and locked
in place.
Caution: Do not press
tip eject button while
Insert
unit is running.
The battery charger is only compatible with a voltage system of 120VAC, 60Hz.
Do not plug the battery charger into a voltage system that is different.
QUICK START GUIDE
installation instructions, please see instruction book
®
NO
Gap
Tip
Eject
Button
2
Battery Pack Insertion:
4
Adjusting Pressure:
The Water Flosser
has 3 settings on the
power switch.
I (low), and
Use the
for first time use.
Increase to
pressure over time, if
you prefer – or as
instructed by your
dental professional.
Model WP-480
Slide battery pack
into handle, lining
up the arrows and
rotate clockwise
until it locks into
place. The arrow on
the battery pack will
line up with the lock
symbol on the back
of the Water Flosser.
O (off),
II (high).
low (I)
setting
high (II)
continued on back