Mac Os X Users; Installing The Driver - Roland Edirol PCR-30 Owner's Manual

Mac OS X Users

Installing the driver

1
Disconnect all USB cables other than those for your keyboard and mouse,
and restart your Macintosh.
2
Prepare the CD-ROM.
Insert the CD-ROM into the CD-ROM drive of your computer.
3
In the Driver (Mac OS X) folder of the CD-ROM, double-click
PCRUSBDriver.pkg.
In Mac OS X v10.1.5, click the lock symbol for authentication.
4
In the authentication dialog box, input the password and click [OK].
5
The display will indicate "Welcome to EDIROL PCR USB Driver
installation".
Click [Continue].
6
The display will indicate "Important message".
Read the contents and click [Continue].
7
The display will indicate "Select the location for installation".
Click the drive in which the operating system is installed to select it, and
then click [Continue].
8
The display will indicate "Easy installation".
Click Install or Upgrade.
9
The display will indicate "When you install this software, you must
restart your computer after the installation is complete".
Click [Continue installation].
10
The display will indicate "The software was successfully installed".
Click [Restart] to restart your computer.
Installing & Setting Up the Driver (Macintosh)
31