Adjusting The Sound To Achieve The Preferred Tone Quality Equalizer) (Kr-7) - Roland KR7/5 Owner's Manual

Chapter 1 Performance
Adjusting the Sound to Achieve the Preferred
Tone Quality (Equalizer) (KR-7)
The KR-7 features a built-in, five-band digital equalizer.
An equalizer boosts or cuts specific sound pitches (frequency ranges) to adjust the
sound balance for the overall performance. For example, you can boost the highs to
get a crisper sound, or boost the low end for a more powerful sound.
You can also adjust the sound to compensate for the acoustical characteristics of the
performance space.
If raising the slider for each frequency ends up distorting the sound, you can correct
the distortion with the Master Level slider.
1.
Press the [Equalizer] button.
The "Equalizer screen" appears.
fig.d-eq.eps_60
2.
Touch the Type icon to make your selection.
Display
Bottom This setting greatly boosts the low end.
Power Boosts both the low- and high-frequency ranges.
Lows and highs are restrained for a pleasant-sounding tone.
Mild
Clear This setting slightly boosts the midrange for a simple pop feeling.
This setting boosts the high frequencies for a brilliant, sparkling sound.
Bright
Flat All slider values are set to "0."
User Store your own preferred settings (p. 35).
3.
Touch the slider to make adjustment.
Displayed
Low
-
34
Explanation
Settings
Value
Low-frequency range. This is the range of frequen-
-60–0–60 cies for instruments like drums, bass, organ, guitar
and strings.
Mid-low-frequency range. This is the range of fre-
-60–0–60 quencies for lower brass and woodwind instru-
ments.
Description
When <Flat> is selected (when
all sliders are at "0"), then even
when [Equalizer] is pressed,
the indicator does not light up.