Roland Fantom G6 Quick Start Manual page 22

Using the Pads to Play Sequenced Phrases (RPS)
Using the pads to play phrases you recorded in the sequencer
1. Use the sequencer to record a phrase.
2. Save the phrase.
3. Select the phrases played by each pad.
Specifying the phrase playback tempo
Phrases will play at the same tempo as the song.
1. Press [TEMPO].
The Tempo window appears.
2. Turn the VALUE dial or use [INC] [DEC] to specify the playback tempo.
• By holding down [SHIFT] and turning the VALUE dial you can make fine adjustments below the decimal
point.
• If you press [F7 (Click)] to turn it on, a click will sound at the specified tempo. The click will turn on/off
each time you press the button.
• If you press [F6 (Tap Tempo)], you can specify the tempo by repeatedly pressing the button at the desired
tempo (Tap Tempo). Press the button three times or more at quarter-note intervals of the desired playback
tempo.
3. When you've finished making settings, press [F8 (Close)].
22
➝ Owner's Manual "Recording into a Phrase" (p. 220)
➝ Owner's Manual "Saving a Phrase (Save)" (p. 216)
➝ This manual "Selecting a phrase" (p. 21)