Table of Contents
Advertisement
Control panel overview
3
Scan to
Sends scanned data (see "Basic Scanning" on page 65).
4
Allows you to copy both sides of an ID card like a
ID Copy
driver's license on a single side of paper (see "ID card
copying" on page 63).
5
Turns the power on or off, or wakes up the machine
Power/
from the power save mode. If you need to turn the
Wakeup
machine off, press this button for more than three
seconds.
6
When the LED lights on, place the front side of an ID
Front LED
card facing down on the scanner glass (see "ID card
copying" on page 63).
7
When the LED lights on, place the back side of an ID
Back LED
card facing down on the scanner glass (see "ID card
copying" on page 63).
8
Stops an operation at any time and there are more
functions.
• Cancels the current job.
• Prints configuration report: Press and hold this
button for about 2 seconds until the status LED
Stop/
blinks slowly, and release.
Clear
• Supplied Information report: Press and hold this
button for about 6 seconds and release.
• Network configuration report
button for about 4 seconds until the status LED
blinks fast, and release.
9
10
11
12
13 Display screen
a. M207xW Series only.
a
: Press and hold this
Allows you to increase/decrease the number of pages
to copy. You can determine the number of copies (up
to 99 copies) to copy by pressing the +/- buttons. The
default value is 1.
+/- Buttons
• If you press the +/- buttons, the number of copies
will increase/decrease by one.
• If you press and hold the +/- buttons, the number of
copies will increase/decrease by ten.
Starts a job.
Start
Indicates the status of your machine (see
Status LED
"Understanding the status LED" on page 100).
Shows the status of the toner (see "Understanding the
Toner LED
status LED" on page 100).
Shows the number of pages you want to copy.
26
1. Introduction
Hide quick links:
Advertisement
Table of Contents
