Cell Size Expansion Via Wds; Common Setup; [Bridge0] Station Role: Root Bridge - Allied Telesis AT-WR4662n Command Reference Manual

Cell size expansion via WDS

This example depicts a network design with a Wireless Distribution System expanding the
coverage area of an RF cell.
AP
Bridge0
Figure 4: RF cell size expansion via WDS

Common setup

Enter the following commands to restore the factory configuration for bridged mode:
AT-WR4600# copy nvram:/factory-config-bridged startup-config
AT-WR4600# reload
Configure the common SSID for open authentication:
AT-WR4600(config)# dot11 ssid ATIopen
AT-WR4600(config-ssid)# authentication open
AT-WR4600(config-ssid)# guest-mode
AT-WR4600(config-ssid)# exit

[Bridge0] station role: root bridge

Assign the static IP address:
AT-WR4600(config)# interface vlan1.1
AT-WR4600(config-if)# no ip address dhcp
AT-WR4600(config-if)# ip address 10.0.0.100/24
AT-WR4600(config-if)# exit
PN 613-001765 Rev.A
STA AP
Repeater
STA
Bridge2
STA
Bridge1
14