Common Setup; [Bridge0] Station Role: Root Bridge; [Repeater] Station Role: Repeater - Allied Telesis AT-WR4662n Command Reference Manual

Common setup

Enter the following commands to restore the factory configuration for bridged mode:
AT-WR4600# copy nvram:/factory-config-bridged startup-config
AT-WR4600# reload
Configure the common SSID for open authentication:
AT-WR4600(config)# dot11 ssid ATIopen
AT-WR4600(config-ssid)# authentication open
AT-WR4600(config-ssid)# guest-mode
AT-WR4600(config-ssid)# exit

[Bridge0] station role: root bridge

Assign the static IP address:
AT-WR4600(config)# interface vlan1.1
AT-WR4600(config-if)# no ip address dhcp
AT-WR4600(config-if)# ip address 10.0.0.100/24
AT-WR4600(config-if)# exit
Configure the station role and the SSID to the radio interface:
AT-WR4600(config)# interface dot11radio 0
AT-WR4600(config-if)# station-role root bridge
AT-WR4600(config-if)# ssid ATIopen
AT-WR4600(config-if)# bridge-group 1
AT-WR4600(config-if)# no shutdown
AT-WR4600(config-if)# end

[Repeater] station role: repeater

Assign the static IP address:
AT-WR4600(config)# interface vlan1.1
AT-WR4600(config-if)# no ip address dhcp
AT-WR4600(config-if)# ip address 10.0.0.10/24
AT-WR4600(config-if)# exit
Configure the station role and the SSID to the radio interface
AT-WR4600(config)# interface dot11radio 0
AT-WR4600(config-if)# station-role repeater
AT-WR4600(config-if)# ssid ATIopen
AT-WR4600(config-if)# bridge-group 1
AT-WR4600(config-if)# no shutdown
AT-WR4600(config-if)# end
12
PN 613-001765 Rev.A