Solid State Drive - Optional; Removing The M.2 Solid State Drive-Ssd Module - Dell Precision 7730 Service Manual

2 Install the:
a base cover
b battery
c battery cover
d SD card
3 Follow the procedure in
Solid State Drive — optional
Removing the M.2 Solid State Drive—SSD module
1 Follow the procedures in
2 Remove the:
a SD card
b battery cover
c battery
d base cover
NOTE: Removal of base cover is required only to access the M.2 SSD module in slot 3, 5 or 6.
3 To remove the M.2 SSD module (Slot 4):
a Remove the single (M2.0x3.0) screw that secures the SSD assembly to the system [1].
b Pull the release latch to unlock the SSD assembly [2].
c Remove the SSD assembly from the system [3].
After working inside your computer.
Before working inside your computer.
Removing and installing components 43