Table of Contents
Advertisement
Chapter 3. Creating Your Own Sounds
Hi Gain (High Gain)
Adjust the gain of the high frequency range.
Amp Type (Amp Simulator Type)
Select the type of guitar amp.
SMALL:
small amp
BUILT-IN: single-unit type amp
2-STACK: large double stack amp
3-STACK: large triple stack amp
Pan (Output Pan) #
Adjust the stereo location of the output sound. L64 is far left,
0 is center, and 63R is far right.
4: PHASER
A phaser adds a phase-shifted sound to the original sound,
producing a twisting modulation that creates spaciousness
and depth.
fig.3-51
L in
Phaser
R in
Resonance
Manual #
Adjust the basic frequency from which the sound will be
modulated.
Rate #
Adjust the frequency (period) of modulation.
Depth
Adjust the depth of modulation.
Res (Resonance)
Adjust the amount of feedback for the phaser.
Mix (Mix Level)
Adjust the ratio with which the phase-shifted sound is
combined with the direct sound.
Pan (Output Pan)
Adjust the stereo location of the output sound. L64 is far left,
0 is center, and 63R is far right.
Level (Output Level)
Adjust the output level.
94
L out
Pan L
Mix
Pan R
R out
5: SPECTRUM
Spectrum is a type of filter which modifies the timbre by
boosting or cutting the level at specific frequencies. It is
similar to an equalizer, but has 8 frequency points fixed at
locations most suitable for adding character to the sound.
fig.3-52
L in
Spectrum
R in
Band 1 (Band 1 Gain)
Adjust the 250 Hz level.
Band 2 (Band 2 Gain)
Adjust the 500 Hz level.
Band 3 (Band 3 Gain)
Adjust the 1000 Hz level.
Band 4 (Band 4 Gain)
Adjust the 1250 Hz level.
Band 5 (Band 5 Gain)
Adjust the 2000 Hz level.
Band 6 (Band 6 Gain)
Adjust the 3150 Hz level.
Band 7 (Band 7 Gain)
Adjust the 4000 Hz level.
Band 8 (Band 8 Gain)
Adjust the 8000 Hz level.
Q
Simultaneously adjust the width of the adjusted areas for all
the frequency bands.
Pan (Output Pan) #
Adjust the stereo location of the output sound. L64 is far left,
0 is center, and 63R is far right.
Level (Output Level) #
Adjust the output level.
6: ENHANCER
The Enhancer controls the overtone structure of the high
frequencies, adding sparkle and tightness to the sound.
fig.3-53
L in
Enhancer
Mix
R in
Enhancer
Mix
Sens (Sensitivity) #
Adjust the sensitivity of the enhancer.
L out
Pan L
Pan R
R out
2-Band
L out
EQ
2-Band
R out
EQ
Advertisement
Table of Contents
