Roland XP-30 Owner's Manual page 25

2
Connect supplied AC power cable to the XP-30, and plug the
other end into an AC power outlet.
3
Connect audio cables and MIDI cables as shown in the
diagram. If you are using headphones, plug them into the
PHONES jack. Connect pedal switches or expression pedals as
necessary.
Getting Ready
On 117V models the AC
cable is permanently
attached to the unit.
In order to take full
advantage of the XP-30's
performance, we
recommend using a stereo
amp/speaker system, If
you are using a mono
system, make you
connections to the
OUTPUT jack L (MONO).
CONTROL PEDAL jack
can also accommodate
pedal switches.
Use only the specified
expression pedal (EV-5;
sold separately). By
connecting any other
expression pedals, you risk
causing malfunction and/
or damage to the unit.
For information on making
the connection with the
computer, take a look at
"Connecting to Your
Computer"
(p. 134).
25