Download
Share
Print this page
  1. Manuals
  2. Brands
  3. SIIG Manuals
  4. I/O Systems
  5. JJ-E40111-S1
  6. Quick installation manual

SIIG JJ-E40111-S1 Quick Installation Manual

4-port rs232 serial mini pcie with power
Hide thumbs

Advertisement

Quick Links

Download this manual
Introduction
The 4-Port RS232 Serial Mini PCIe with Power high-speed
serial I/O card provides four 9-pin serial ports.
Features and Benefits
•
Compliant with PCI Express Base Specification 1.0a
•
Installs in any available Mini PCI Express slot and
provides four 9-pin RS232 serial ports via four DB9
flat cables
•
Four 16950 UART (9-pin) RS232 serial ports support
up to 460.8 Kb/s with deep 128-byte FIFO per
transmitter and receiver
•
Works as standard RS232 port or with 5V power
output for devices that require power
System Requirements
•
PCI Express-enabled system with an available Mini
PCI Express slot
•
Windows 7 (32-/64-bit) / Vista (32-/64-bit) / XP
(32-/64-bit) / Server 2003 & 2008 (32-/64-bit) / 2008
R2/ 2000
Serial Number Sticker
For future product return or exchange this serial number
is required. Please keep it for your reference.
04-0799A
4-Port RS232 Serial Mini
PCIe with Power
Quick Installation Guide
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the JJ-E40111-S1 and is the answer not in the manual?

Questions and answers

Related Manuals for SIIG JJ-E40111-S1

Summary of Contents for SIIG JJ-E40111-S1

  • Page 1 4-Port RS232 Serial Mini PCIe with Power Quick Installation Guide Introduction The 4-Port RS232 Serial Mini PCIe with Power high-speed serial I/O card provides four 9-pin serial ports. Features and Benefits • Compliant with PCI Express Base Specification 1.0a • Installs in any available Mini PCI Express slot and provides four 9-pin RS232 serial ports via four DB9 flat cables...

  • Page 2: Package Contents

    Package Contents • 4-Port RS232 Serial Mini PCIe adapter • 4 DB9 flat cables • Power cable • Driver CD and quick installation guide Layout Power With or without 5V connector* power jumper settings DB9 flat cable DB9 flat cable connectors connectors Figure 1: 4-Port RS232 Serial Mini PCIe board Layout...
  • Page 3 Molex Power Power connector 9-pin serial connector to to PCB Board connector system (optional)* Figure 2: 4 DB9 flat cable & Power cable * Note: If the serial port(s) requires power output, connect the system power source to board's power connector, otherwise leave it unconnected.

  • Page 4: Hardware Installation

    Hardware Installation General instructions for installing the card are provided below. Since the design of computer cases and motherboards vary, refer to your computer’s reference manual for further information, if needed. Static Electricity Discharge may permanently damage your system. Discharge any static electricity build up in your body by touching your computer’s case for a few seconds.

  • Page 5: Driver Installation

    Driver Installation This section provides information on how to install the 4-Port RS232 Serial Mini PCIe drivers. Windows 7 (32-/64-bit) / Windows 2008 R2 Right clik Computer, click Manager, click Device Manager. Insert the driver CD. Note: Close the CD AutoPlay box if prompted. Right click PCI Serial Port, click Update Driver Software.
  • Page 6 For 32-bit: Type D:\Win_2000_XP_Vista\WINDOWS_UART\x86, then click Next. (Change D: to match your CD- ROM drive letter) For 64-bit: Type D:\Win_2000_XP_Vista\WINDOWS_UART\amd64, then click Next. (Change D: to match your CD- ROM drive letter) Click Close. Windows XP (32-/64-bit) / Server 2003 (32-/64-bit) At the Found New Hardware Wizard, select No, not this time, click Next.
  • Page 7 Insert the driver CD, click Browse my computer for driver software (advanced). For 32-bit: Type D:\Win_2000_XP_Vista\WINDOWS_UART\x86, then click Next. (Change D: to match your CD- ROM drive letter) For 64-bit: Type D:\Win_2000_XP_Vista\WINDOWS_UART\amd64, then click Next. (Change D: to match your CD- ROM drive letter) Click Close.
  • Page 8 To Verify Windows Installation Use Device Manager to verify successful installation. For Windows 7 : Right click Computer, click Manage, click Device Manager. For Windows Vista: Right click Computer, click Manage, click Continue, click Device Manager. For Windows 2000 / XP / Server 2003: Right click My Computer, click Manage, click Device Manager.
  • Page 9 Blank Page...
  • Page 10 Blank Page...

  • Page 11: Technical Support And Warranty

    (2) years from the date of purchase of the product. SIIG will, at our discretion, repair or replace (with an identical product or product having similar features and functionality) the product if defective in materials or workmanship.
  • Page 12 Fremont, CA 94538-3152, USA Phone: 510-657-8688 4-Port RS-232 Serial Mini PICe With Power is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Microsoft, Windows and Windows Vista are registered trademarks of Microsoft Corporation in the United States and/or other countries. Other names used in this publication are for identification only and may be trademarks of their respective companies.