Setting The Medication Reminder - ADC Advantage 6021 User Manual

5.9. Setting the Medication Reminder (6023 only)
This instrument allows you to set two alarm times at which an alarm signal will
then be triggered. This can be a useful aid, for instance as a reminder to take med-
ication or toremind you to take your blood pressure at the same time each day.
a) To set an alarm time, press the Date/Time button (the in-
strument must have been switched off beforehand) and immedi-
ately afterwards the Memory button and hold both down until the
bell symbol appears in the bottom left of the display. Then re-
lease both buttons. The flashing "1" in the display indicates that
the first alarm time can now be set.
b) Press the Date/Time button to set the hour – the hour dis-
play flashes. Pressing the Memory button allows you to set the
alarm hour. To confirm, press the Date/Time button
c) The minute display will now flash. The minutes can be set
using the Memory button. To confirm, press the Date/Time but-
ton again.
d) The bell symbol will now flash. Use the Memory button to
select whether the alarm time is to be active (bell) or inactive
(crossed-out bell). To confirm, press the Date/Time button.
To set a second alarm time, proceed as above but if the
"1" flashes, press the Memory button to select "2" and
confirm with the Date/Time button.
• An active alarm time is indicated by the bell symbol in
display.
• The alarm sounds at the set time every day.
• To switch-off the alarm when it is sounding, press the
START/ON/OFF button.
• To permanently switch-off the alarm, proceed as above
(Steps a-d) and select the crossed-out bell symbol. This will
then disappear from the display.
• The alarm times must be re-entered each time the batteries are replaced.
17
TIME PM