Loading System Exclusive Data Dumps - Roland D Station User Manual

Data Entry/Program
Loading Sysex
NOTE: The program 'Saved' will be the program currently selected in the 'Program' mode. If you were editing a program,
the modified version will be saved. Press the 'SAVE' ( '+' ) button to transmit the single program.
To save all the programs in the D Station Rack press the 'SAVE TYPE' ('-') button once, the display changes to:
Ensure that your computer or data storage device is ready to accept the sysex bulk dump. Press the 'SAVE' ( '+' ) button
to transmit the 'All programs' dump. The Global settings ( MIDI Tx and Rx channels ) will also be saved.
NOTE: The display will briefly go blank as the data is transmitted.

Loading System Exclusive Data Dumps

Single Programs
1 If you want to overwrite an existing program, select the 'Program' mode and call up the program number you want to use.
Now, move the 'Write' switch to the 'Enable' position and transmit the sysex dump from your computer. The 'Write' LED on
the display will flash to confirm reception. Return the 'Write' switch to the 'Protect' position.
NOTE: This operation will erase the existing program and replace it with the program from the computer.
12
Ensure that your data storage device is ready to accept the data. Use the 'Mode' button to
select 'SAVE' mode - LED on, the display shows:
PROGRAM
MIDI RX CH
MIDI TX CH
UTILITY
EDIT WRITE SAVE
PROGRAM
MIDI RX CH
MIDI TX CH
UTILITY
EDIT WRITE SAVE