Rhythm Settings; Preventing Rhythm Tempos From Switching Automatically (Auto Std Tempo); Changing The Sound Of The Countdown (Count Down Sound) - Roland Music ATELIER AT300 Owner's Manual

Various Other Settings

Rhythm Settings

Preventing Rhythm Tempos from
Switching Automatically
(Auto Std Tempo)
You can prevent rhythm tempos from switching automatically
when you switch rhythms.
1.
Press the [Utility] button.
2.
Press the Menu [
"Auto Std Tempo" (Auto Standard Tempo).
3.
Press the Value [-] or [+] button to switch the
Auto Standard Tempo "ON" or "OFF."
Setting
Switching the rhythm while the rhythm is
ON
stopped automatically changes the tempo
settings to those in the new rhythm.
When the rhythm is stopped, the tempo
OFF settings are not changed automatically when
the rhythms are changed.
To return to the basic screen, press the [Utility] button.
This setting remains stored in memory even while power is
turned off.
108
] or [ ] button to select
Descriptions
Changing the Sound of the Countdown
(Count Down Sound)
You can change the sound that is used for the count played at
the end of the intro with the Intro Countdown function (p. 45).
1.
Press the [Utility] button.
2.
Press the Menu [
"Count Down Sound."
3.
Press the Value [-] or [+] button to select the
type of sound for Intro Count Down.
Setting
VOICE
Human voice count (One, two, three...)
STICK
Stick sound count
To return to the basic screen, press the [Utility] button.
You can adjust the volume of the Count Sound, refer to
"Adjusting the Metronome Volume (Metronome Volume)" (p.
111).
] or [ ] button to select
Descriptions