Alesis Strike Quick Start Manual page 8

Editing Kits
Whenever you edit an instrument, it changes the kit, which is essentially the same as editing
the kit.
To edit a voice:
1. Press Kit to enter the Kit menu (the default view when you power on the drum module).
2. Select a kit (described above in
3. Select an instrument by doing one of the following:
•
If the Note Chase button is off, press it so it turns on. With Note Chase on,
strike the desired zone of the trigger (drum or cymbal pad) whose voice you
want to edit.
•
Use the cursors to select the trigger (drum or cymbal pad) whose instrument
you want to edit.
The currently selected zone of the drum or cymbal pad will be highlighted orange.
4. Press Enter. You will see the Instrument Browser menu where you can select one of over
1,600 instruments as well as any custom instruments on your SD card that you've
created with the Strike Editor.
Metronome
To turn the metronome on or off, press On/Off.
To adjust the tempo of the metronome, do one of the following:
•
Press Tempo at least 3 times at the desired rate.
•
Press and hold Tempo, and then turn the data dial to select a new tempo.
8
Selecting Kits).