Page 1
QU-8-4K22 1 to 8 HDMI Distribution Amplifier (4K, HDCP2.2, HDMI2.0) OPERATION MANUAL...
Page 3
DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. CYP (UK) Ltd assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be contained in this document.
SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: • Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
1. INTRODUCTION The QU-8-4K22 Distribution Amplifier (splitter) accepts one HDMI input and splits this signal to eight identical outputs. This device supports 4K2K Ultra-High Definition video with HDMI2.0 and HDCP2.2 compliance. In addition, 3D Video signals and High Definition Audio formats such as LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus, Dolby Atmos and DTS-HD...
5. FEATURES HDMI 2.0, HDCP 2.2 and DVI compliant HDMI 1 to 8 HDMI splitter Supports UHDTV resolutions up to 4K2K: 3840×2160@24/25/30/50/60Hz & 4096×2160 @24/25/30/60Hz Supports passthrough of high definition audio: LPCM 2/5.1/7.1CH, Dolby Digital 2/5.1CH, DTS 2/5.1CH, Dolby TrueHD, DTS-HD Master Audio &...
6. OPERATION CONTROLS AND FUNCTIONS 6.1 Front Panel OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT EDID SYS-RST EDID: Switch the dip switch to choose EDID mode to Standard (STD) or TV mode. When on TV mode, the unit will automatically detect and store output 1 sink EDID data.
6.2 Rear Panel SERVICE OUTPUT OUTPUT SYNC INPUT OUTPUT POWER DC 5V SERVICE: This is reserved for firmware update use only. OUTPUT 6~8: Connect to HDMI 6G TV/display or HD amplifier for output signal display. SYNC: When input detected, the LED will illuminate, the LED will flicker when detected abnormal, for example, when source signal not stabled.
Need help?
Do you have a question about the QU-8-4K22 and is the answer not in the manual?
Questions and answers