Roland CDR-88RW-4 Owner's Manual page 9

Check the software version of Roland VS series
To connect CDR-88RW-4, the system software of VS series may need to be updated. Please check
the software version which can be connected to CDR-88RW-4.
In case update of software is necessary, consult with your retailer, the nearest Roland Service
Center, or an authorized Roland distributor, as listed on the "Information" page.
How to check the version of the system software
1. Turn the power on while holding [CH EDIT] and [STATUS] of channel 1.
2. Version of the system appears at first like "VS-880 Ver 3.201" at the top of the display.
3. Then the startup process begins as usual.
Please find compatibility of your unit as follows.
Software version
Before ver.3.204
Ver.3.204 or later
How to check the version of the system software
1. Turn the power on while holding [SELECT] and [STATUS] of channel 1.
2. Version of the system appears at first like "VS880EX Ver2.001" at the top of the display.
3. Then the startup process begins as usual.
Please find compatibility of your unit as follows.
Software version
Before ver.2.013
Ver.2.013 or later
How to check the version of the system software
1. Turn the power on while holding [SELECT] and [STATUS] of channel 1.
2. Version information screen appears at first. This screen includes the system version No. on top
like "VS 1680 Ver2.001."
3. Press [YES/ENTER], the startup process begins as usual.
Please find compatibility of your unit as follows.
Software version
Before ver.2.021
Ver.2.021 or later
Compatibility with CDR-88RW-4
Update needed
Compatible
Compatibility with CDR-88RW-4
Update needed
Compatible
Compatibility with CDR-88RW-4
Update needed
Compatible
9