Roper RGS7648EN2 Use And Care Manual page 17

R
EMOVING ACCUMULATED LINT FROM INSIDE THE DRYER CABINET
Lint can gather inside the dryer and be a fuel
for fire. Lint should be removed every two to
three years, or more often, depending on dryer
usage. Cleaning should be done by a qualified
person. If you have any questions or comments,
please call our Consumer Assistance Center at
1-800-447-6737 from anywhere in the U.S.A.
1.
Unplug dryer or turn off power supply.
2.
Remove rear panel.
3.
Remove any lint using a vacuum cleaner or soft
brush. Avoid damaging wires and thermostats.
4.
Replace rear panel.
5.
Open lint screen lid. Remove 2 screws from
lint screen area.
6.
Open top by pulling forward and up at each
front corner (see illustration). Rest raised top
against wall behind dryer (top is hinged at rear).
wWARNING
Electrical Shock Hazard
Disconnect power before cleaning.
Replace all panels before operating.
Failure to do so can result in death or
electrical shock.
Heater box
Thermostats
Dryer with rear panel removed
CARING FOR YOUR DRYER
continued on next page
17