Pumps (Drain And Circulation) - LG WM2496*M Series Training Manual

WM2496H*M
DISASSEMBLY/REPAIR
Page 43 of 58
(Pumps)
1. Remove the front cabinet.
(See page 40.)
2. Drain the water from the sump.
(See page 40.)
3. Remove the clamps and hoses.
4. Remove two screws and push
the pump backward and up.
5. Press down the plastic tab on
the base to slide the pump
assembly backward.
This tab is for the convenience
of the workers in the assembly
plant. It holds the pump in
place while the machine is
being built. If you break it,
don't worry about it.
6. You can tilt the pump in either
direction to remove/replace the
individual pumps without
having to remove the tub.
Have a towel handy to catch
the spillage.
TRAINING MANUAL