LG WM2496*M Series Training Manual page 17

WM2496H*M
PEDESTAL, continued
5.
6.
7.
8.
Page 17 of 58
Depending upon the model, your
pedestal may have straight or
curved brackets. The curved
ones are to be used on the rear
positions when mounting a dryer
to a pedestal, but can also be
used in any other position on the
pedestal.
Holding the exposed adhesive
away from the appliance, insert
the screws and get them started.
Then press the brackets to the
appliance and tighten all the
screws. Rub the bracket from
side to side to ensure a
complete bond.
Use the wrench to turn each leg
of the appliance approximately
¼ turn to put a little pressure
between the appliance and the
pedestal. This will eliminate any
rattles.
It is usually easier to set the
pedestal and washer into place
and connect the water and drain
hoses before placing the dryer
on top of them.
TRAINING MANUAL