Parts Identification (Callout) - LG WM2496*M Series Training Manual

PARTS IDENTIFICATION
The air vent on the back of the machine must be left open and clear at all times.
If the washer is installed in a closet or closed laundry alcove, there must be
sufficient clearance and ventilation. The closet should have a full louvered door
2
with at least 350 square inches (0.5 m ) of open area for ventilation.
The washer requires a space of at least 1 inch (2.5 cm) between the wall and the
machine on each side and at least 4 inches (10 cm) between the back of the
washer and the wall. Additional space may be needed for servicing.
WM2496H*M Page 12 of 58 TRAINING MANUAL