Connecting Mains Power; Signal Connections - Roksan Audio MkIII User Manual

S E T U P

CONNECTING MAINS POWER

Please refer to the rear panel view on page 5.The moulded connector of the supplied mains lead should be
plugged into the socket (11, observe polarity) on the rear of the unit first and then plugged into the mains
supply. If the unit is likely to be unattended for a long period, unplug the mains lead from the wall.

SIGNAL CONNECTIONS

ANALOGUE OUTPUT:
DIGITAL OUTPUTS:
SCART OUTPUT:
VIDEO OUTPUTS:
Roksan Audio ltd
CLASSIFICATION: General Use
All specifications are liable to change without notice. E&OE
Front L&R Analogue Outputs (8) are RCA Phono sockets and should be connected to
the DVD or LINE input of your Preamplifier, Integrated Amplifier or Audio Input of your
TV.
The connections are: Right Channel – Red; Left Channel – White.
Surround (REAR) L&R Analogue Outputs (9) are RCA Phono sockets and ideally
should be connected to the TRIMMED L&R Input of your Kandy 3 channel Power
Amplifier or an Audio Input of a Multichannel Amplifier.
The connections are: Right Channel – Red; Left Channel – White.
Centre Analogue Output (3) is RCA Phono socket and ideally should be connected to
the TRIMMED C Input of your Kandy 3 channel Power Amplifier or an Audio Input of
a Multichannel Amplifier.
The connection is: Centre Channel – Black.
Subwoofer (SUB) Analogue Output (4) is RCA Phono socket and ideally should be
connected to an Active Subwoofer.
The connection is: Subwoofer Channel – Black.
There are two Digital Outputs, one Coaxial the other Optical. The Digital Output (1) is
an Optical Tos-Link and should be connected to the Optical Tos-Link Digital Input of
your DSP (Digital Surround-sound Processor).
The connection is: Optical Output – Tos-Link.
The Digital Output (2) uses a 75 Ohm RCA socket and should be connected to the
Coaxial Digital Input of your DSP.
The connection is: Coaxial Output – Orange.
There is a SCART Output (10) for convenience that could be connected to the
SCART Input of your TV, Projector or Monitor.
The connection is: SCART.
There are three Video Outputs, one Composite, one S-Video and one Component.
The Composite Output (6) are RCA sockets and should be connected to the
Composite Video Input of your TV, Projector or Monitor.
The connection is: Composite Video – Yellow.
K a n d y Dual Laser DVD Player
Page 6 of 16
Front L&R or Stereo
Surround L&R
Centre
Subwoofer
Kandy DVD Player User Manual
Version 3.00
ENGLISH