Selecting The Type Of Disc For The Type Of Tv Connected - Roksan Audio MkIII User Manual

SYMPTOM (DVD)
Play does not commence even
when title is selected.
Audio soundtrack and/or subtitle
language is not the one selected at
the initial settings.
No subtitles.
Alternative audio soundtrack (or
subtitle) languages fail to be
selected.
Angle cannot be changed
SYMPTOM (Video CD)
No menu play

Selecting the type of disc for the type of TV connected

Both the DVD discs and Video CDs have the material recorded in PAL and NTSC systems. Refer to the table
below to select the correct setting for the type of TV connected.
Connecting to the multi system TV
Connecting to the NTSC system TV
Roksan Audio ltd
CLASSIFICATION: General Use
All specifications are liable to change without notice. E&OE
Check "PARENTAL" setup.
If the audio soundtrack and/or subtitle language does not exist on the disc, the
language selected at the initial settings will not be seen/heard.
Subtitles appear only with discs, which contain them.
Subtitles are cleared from the TV monitor. Press SUBTITLE to display the
subtitles.
An alternative language is not selected with discs, which do not contain more
than one language.
This function is dependent on software availability. Even if a disc has a number
of angles recorded, these angles may be recorded for specific scenes only.
This function works only for video CDs with playback control (version 2.0 and
above).
Connecting to the PAL system TV
NOTE:
TV SYS. Button (30) on the remote
marches through MULTI – NTSC - PAL ...
with every press. This way the setting is
changed but 'locally' until the disc is
removed. Then the DVD reverts to the
original setting in the setup menu.
Selecting the correct system for the type
of disc can improve picture quality,
especially motion.
Page 13 of 16
REMEDY
REMEDY
Kandy DVD Player User Manual
Version 3.00
ENGLISH