Vacron VFH-8223I Easy Manual

Installation type
■ Brackets
Bracket installation. There are 4 type of installations :
Wall Mount :
275 0 . 275 0 . 275 0 .
346 5 . 346 5 . 346 5 .
227 4 . 227 4 . 227 4 .
Corner Mount :
4- 9 0 .
￠
50
120
180
Pole Mount :
50
120
105 127 -
Pendant Mount :
7 4 *
￠
244 8 .
543 5 .
100 24
85
543 5 .
Installation Guide
■ Wall Mount
1.Check the intensity of wall. Recommended load-bearing capacity of the
wall should be 8 times the weight of speed dome plus accessories.
2.Mark installation position: Use the template to do stand base, mark the
location of the mounting holes on the wall.
3.Bracket installation: First, lead out the control cable, network cable,
power cable from bracket, and mount the bracket by 4 screws on wall.
4.Speed Dome installation: assemble speed dome to bracket, make sure
the bracket teeth well matched to speed dome 3 slots, and clockwise
rotation to tighten screws.
PM4*6mm screws
Align
Note: Cables can be lead through from wall hole or bracket sides.
174
Table of functions
110
Speed Dome supports shortcut command to achieve partial functions
76
(Only for PELO-D、P agreement)
Fumction
Turn off Light sensor
Turn on Light sensor
Turn off Infrared light
Infrared light low beam
Infred light high beam
180
140
Turn on Infred light low beam、high beam
Turn off Zoom linkage
Turn on Zoom linkage
85
Turn off Black & White/Color Zoom linkage
110
Turn on Black & White/Color Zoom linkage
Set the left margin of the 1st area scan
Set the right margin of the 1st area scan
Set the left margin of the 2nd area scan
Set the right margin of the 2nd area scan
Set the left margin of the 3rd area scan
Set the right margin of the 3rd area scan
Set the left margin of the 4th area scan
240
155
Set the right margin of the 4th area scan
Run the 1st scan area
Run the 2nd scan area
Run the 3nd scan area
Run the 4nd scan area
Continuous operation level scan
Run 1st cruise
Run 2st cruise
Run 3st cruise
Run 4st cruise
Erase the 1st cruise queue
Erase the 2nd cruise queue
Erase the 3nd cruise queue
Erase the 4nd cruise queue
Run the 1st scan pattern
Run the 2st scan pattern
Run the 3st scan pattern
Run the 4st scan pattern
Record the 1st scan pattern
Record the 2st scan pattern
Record the 3st scan pattern
Record the 4st scan pattern
End Recording scan parrern
PM5*12mm screws
External Cables
Shortcut command ( Goto Preset No.)
150
151
154
154
155
IP Surveillance
156
157
158
159
160
161
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
Network IR Speed Dome Camera
 Easy Guide Manual 
Features
‧Adapt high quality motor with less heat and no tremble during low
speed revolve.
‧Low temperature Power on protection.
‧Fast connectors, easy install.
‧Stepless，Horizontal: 360°(Continuous);Vertical: 90° (180° Auto Flip).
‧255 Preset position，±0.1°
‧180°/s Speed of preset position.
‧8 cruises，32 preset positions/cruise.
‧8 Pattern scan， 8 Zone/ Horizontal scan.
‧IR range: 100M
‧Auto matching of focal length and rotation speed.
‧Auto operation record, avoid power failure lost.
•RS485 compatible to PELCO D/P.
‧Return to automation after manual operation.
‧S/W interface update.
‧Previous position memory function, reboot after power failure
to return to previous position.
‧IP66 design with built-in automatic thermostat.
‧Lightning & Surge proof.
‧Built-in alarm; alarm priority setting, Alarm trigger method and preset
positions, Alarm timer lifting function.
2014 AUG V1.1