Specifications - Digital Alert Systems DASAMC User Manual

Digital Alert Systems

Specifications

AUDIO MESSAGE CONTROLLER
LAN Interface: TCP/IP Ethernet
•
One (1) 10/100BASE-T Ethernet IEEEE 802.3
•
RJ-45 connectors suited for wiring CAT-5 or above
•
Port features link & data indicators
•
Assignable IP addressing (unit ships fixed at 192.168.0.210)
USB Interface
•
• Four (4) USB 2.0 type A sockets
Front Panel Indicators:
•
Power - Green
Physical Attributes:
•
19.0"W x 10.0"D x 1.75"H (1RU EIA rackmount)
•
Weight: 4lbs
Power Requirements:
•
Input 120VAC @ .25 amps (10 Watts)
MULTIPLAYER
Audio Inputs: (varies by configuration settings)
Digital Audio
•
Balanced AES/EBU digital audio (program in) 110 ohm female XLR
Analog Audio
•
One-pair (1) balanced 600 ohm stereo audio (program in) female XLR Audio Outputs: (varies by configuration
settings) Digital Audio
•
Balanced AES/EBU digital audio (program out) switched 110 ohm male XLR
•
Auto-set to incoming sample rate, or 48 KHz without reference input Analog Audio
•
One-pair (1) balanced 600 ohm stereo audio (program out) male XLR
LAN Interface: TCP/IP Ethernet
•
One (1) 10/100/1000BASE-T Ethernet IEEEE 802.3
•
RJ-45 connectors suited for wiring CAT-5 or above
•
Port features link & data indicators
•
Assignable IP addressing (unit ships fixed at 192.168.0.220)
GPI/O's (General Purpose Inputs/Outputs):
•
Four (4) software defined inputs per channel
•
Two (2) software defined outputs rated 2A @ 30VDC per channel
•
10-pin detachable terminal strip per channel
Front Panel Indicators:
•
Alert Pending one per channel - Amber
•
On-Air one per channel - Red
•
Master Audio - Blue
•
Power - Green
Physical Attributes:
•
• 19.0"W x 10.0"D x 1.75"H (1RU EIA rackmount)
Weight:
•
8lbs
Power Requirements:
•
• Input 120VAC @ .25 amps (30 Watts)
Revision 3.0
AMS Installation /Operation & Integration Guide
Page 31 of 31