Amc Configure > Gpio - Digital Alert Systems DASAMC User Manual

Digital Alert Systems
Setting General Purpose Inputs and General Purpose Outputs
•
AMC Configure > GPIO
The AMS provides a number of General Purpose Inputs and General Purpose Outputs using the GPIO connections on the
MultiPlayer (see Table 3 MultiPlayer GPI & GPO connections. Port 1 shown as example - other ports follow same
configuration.) Each GPI and GPO features mnemonic area allowing each input or output to be labeled thereby making it easy
to identify which device is either sending or receiving the intended signal. These labels and the current state are also shown in
the MultiPlayer expanded view on the Home page.
Revision 3.0
AMS Installation /Operation & Integration Guide
1. The display will expand to show the download
and updating progress as seen in the example
on the left
2. Once the download and update is complete the
screen will refresh with the latest information.
3. In those cases where a reboot is required it will
display the log in screen
1. Each of the GPI's and GPO's can be labeled by
editing the Name text field above each of the pull
down menus
(Values shown at right are examples only and
may not reflect the required or desired
configuration)
2. Using the pull down menu select the desired
action for each of the GPI's and GPO's. The
actions for each function are described in the
tables 6, 7 & 8 below.
If there is no action required leave the action in
the default states of Ignore for GPI or Disabled
for GPO.
3. To accept any changes, click the Save button.
To Reset all name and action settings, click the
Clear / Reset All button.
Page 21 of 31