Advertisement
1. Connection of the receiver
Backside
Input
Loop
Input
Input
Loop
Audio
Video
Fan
PSU
2. Operating the receiver
Front
RS232
RS232
CI
Conax /
Viaccess
Display
PSU
Navigation:
BACK
ENTER
Å
Æ
Page 2
L
R
Audio
Video
Description
LNB input 950 - 2050 Mhz.
LNB output can be used, if more than one receiver is
connected, and using the same polarity and band (high/low).
This is only used within small installations.
Audio L/R output.
Video output.
2 fans make sure that the receiver does not overheat.
Plug and switch to turn off the 240V supply.
Conax / Viaccess
DVB-CI
Description
Connection to PC, if the software need to be upgraded.
Cam reader for Common Interface modules.
Place the module with the serial number down.
Card reader for Conax and Viaccess cards.
Place the card with the yellow ic. down.
2 lines lcd display.
Plug and switch to turn off the 240V supply.
Exit/back botton in the menu
Activate menu, or open the sub menu
Menu UP
Menu DOWN
Moves cursor BACKWARDS
Moves cursor FORWARDS
Power max. 45w
100-240V ~
50/60 Hz
!
CAUTION
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
Back
Enter
Advertisement
