Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Digiality Manuals
  4. Receiver
  5. SMATV 112
  6. User manual

Digiality SMATV 112 User Manual

Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
S M AT V 1 1 2
D I G I T A L
R E C E I V E R
User manual (UK)

Advertisement

loading

Related Manuals for Digiality SMATV 112

Summary of Contents for Digiality SMATV 112

  • Page 1 S M AT V 1 1 2 D I G I T A L R E C E I V E R User manual (UK)

  • Page 2: Connection Of The Receiver

    1. Connection of the receiver Backside Power max. 45w 100-240V ~ 50/60 Hz CAUTION RISK OF ELECTRICAL SHOCK Input Loop Audio DO NOT OPEN Video Input Description Input LNB input 950 - 2050 Mhz. LNB output can be used, if more than one receiver is Loop connected, and using the same polarity and band (high/low).
  • Page 3 3. In general We do not recommend, that you connect more than one SMATV 112 to one universal LNB. We recommend, that you use a quattro or twin LNB instead. 4. Display 29 C UP:00000:20 BER:007% When the receiver is not beeing programmed, it will show information about:...
  • Page 4 5.1.3. 1-3-LNB Power 1-3-LNB Type ON u turns on the power to the LNB turns off the power to the LNB 5.1.4. 1-4--22 KHz 1-4-22 KHz OFF u Is only used if the 22KHz switch is mounted between the receiver and the LNB. 2-Tuner In the TUNER menu, you can adjust the frequency on the transponder you wish to receive.
  • Page 5 5.2.3 2-3-Symbolrate 2-3-Symbolrate 22000Ksy u You can choose between the following symbolrates 22000, 22500, 24500, 26000, 27500, 27800 and 28000. If you need another specific symbolrate, you can type it in by pressing ENTER. 3-Channel When you press ENTER, the receiver will start searching for the programmes, which match the values you have programmed into the receiver.
  • Page 6 The following values needs to be typed in: Program ID - VPID - APID - PCR PID 5.3.5 3-5-VPID 3-5-VPID The value is only typed in, if the receiver can not find the channel under normal search. 5.3.6 3-6-APID 3-6-APID The value is only typed in, if the receiver can not find the channel under normal search.
  • Page 7 4-Audio Output The volume can be adjusted, so that it is the same as the other channels. 5.4.1 4-1-Volume Level 4-1-Volume LEvel Press ENTER and type in a value. 5-Reset Receiver Resets the receiver. 5.5.1 5-1-Confirm Reset 5-1-Confirm Reset NO u If you choose YES and then ENTER, the receiver will reset within a short while.

  • Page 8: Smart Card

    8-Smartcard Gives informations about the programme card.This information comes with the CVBS signal. 9-Common Interface Gives information about the card in the Common Interface slot. This information comes with the CVBS signal. 5.10 10-Alarm Report In this menu you can see the last 10 problems that has made the receiver restart. 5.11 11-Software Version Shows the software version in the receiver.