Controls And Features; Top View Of Amplifier And End Caps - Rockford Fosgate 100X2 Owner's Manual

CONTROLS AND FEATURES

This section describes the various controls and features of
the Punch amplifiers.
Punch
The cast aluminum heatsink of the Punch is designed for
Housing high performance cooling. The raised design of the hous-
ing allows cables and wires to run underneath the unit.
This provides for greater wiring flexibility and protects the
cables from damage caused by excessive heat and bend-
ing.
End Caps Interchangeable end caps conceal the wiring and input
cables, giving the amplifier a clean, "stealth" look. Also
incorporated, is a holding dimple built into the end cap.
This small feature enables the cap to be held in place while
being mounted.
The end caps are secured to the housing with flush
mounting, captive screws.
Mounting
Four (4) custom, round, hex screws included in the acces-
Screws
sory pack hold the unit in place. These screws are covered
when the end caps are installed.

Top View of Amplifier and End Caps

6