Product Operation; Starting Up/Standby/Sleeping; Status Indicator Light; How To Use The Remote Control - Pyle PUCRC750 Instruction Manual

Product Operation

Starting up/Standby/Sleeping

1. Starting up
a. Make sure the battery and dust bin is placed correctly.
b. Press the " " button on main body or remote control to
start cleaning.
Note: If the robot is in sleeping mode, press the "
main body or remote control to change it to the standby
mode first and press the " " again to start cleaning.
2. Standby
Standby means the robot on ready state waiting for further
operation. Change to standby via followed ways:
a. When the robot is working, press "
standby.
b. Press the ON/OFF button on the remote control.
3. Sleeping
When the robot is in sleeping mode, press the "
press the ON/OFF on the remote control to activate process.
To conserve battery life to a maximum degree, you can:
a. Long press " " for 3 seconds to switch to sleeping
mode, while on standby mode.
b. Will switch robot to sleeping automatically if there is no
operation for 30 seconds.

Status Indicator Light

a. Cleaning : green light
b. Self-charging : yellow light
c. Charging : yellow light, strong to weak
d. Standby : yellow
e. Error : red light
8
" on
" to switch to
" or long
Product Operation

How to use the remote control

1. ON/OFF button / CLEAN button
a. Short press to start cleaning when in standby/working
mode
b. Short press to confirm the schedule/time modification
when in scheduling mode.
2. Plan / Schedule button
a. In standby mode, short press to check the schedule.
b. In modifying schedule mode, long press to back to
sleeping.
c. In standby mode, long press for 3 seconds to schedule the
time.
3. Self-charging button
a. When in working, short press to make the robot back to
home base for charging.
4. Mode button
a. When in working, short press to switch cleaning modes.
5. Clock button
a. In standby mode, short press to check the time, long
press to modify the time.
b. In modifying mode, short press to back to standby mode.
6. Spot button
a. In standby/working mode, press to start spot cleaning.
7. Directional button
a. In standby/working mode, press to make the robot turn
left, right, back and go forth.
b. In modifying time/schedule mode, press
the time. Press to modify between "hour" and
"minute".
c. : go forth
d. : go back
e. : turn left
f. : turn right
PLAN HOME
ON/OFF
MODE CLK SPOT
to modify
9