Advertisement
Hardware Installation
Note:
Follow the general instructions for installation of the CardReader. If necessary,
read the manual of your computer, or ask a specialist for help.
1. Turn off your PC, and unplug the power cord.
2. Open the housing.
3. Remove the panel from the available 3.5" bay.
4. Insert the CardReader into the bay and screw the CardReader to the
housing.
5. Connect the CardReader directly to the Mainboard or use the cable, which is
included in the package, to connect the USB A cable outside of the housing.
6. Reattach the housing, and connect the power cord to the AC adapter.
Driver Installation
1. Switch on your computer.
2. The CardReader will be recognized and you can start using the device
immediately.
Support Delock
If you have further questions, please contact our customer support
support@delock.de / www.delock.com or phone +49 30 81789324*.
You can contact our service hotline during the following times:
Mon – Fri: 9:00 – 16:30 pm
* A connection fee applies according to fee schedule of your local telephone
provider.
You can find current product information on our homepage: www.delock.com
Final clause
Information and data contained in this manual are subject to change without
notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any purpose,
regardless in which way or by which means, electronically or mechanically,
without explicit written approval of Delock.
Edition: 08/2008
-
-
Advertisement
