Related Manuals for Nobacco APYRON
Summary of Contents for Nobacco APYRON
- Page 1 Οδ ηγ ός χρή σ η ς Pro du c t man u al Ma n ua l de ut il i zare Р ъ к о в од ст во за у п от р е б а...
-
Page 2: Package Contents
If you require any additional information about the product or its use, please consult your local reseller or visit the NOBACCO’s official website at www.nobacco.gr. NOBACCO DESIGN CENTER, using one of the most ad-... - Page 3 ΕΝ Dimensions: 82x42x22 mm *The company reserves the right to change the contents and characteristics of the package or/and the product without any prior notice.
-
Page 4: Device Characteristics
Product manu al DEVICE CHARACTERISTICS: • Metal Body • Solid Steel buttons • 510 solid steel connector with spring loaded pin • Micro USB pass-through charging port • 2000mAh built in battery • 0.96’’ OLED screen • Main Function (Fire) Button •... - Page 5 ΕΝ NOBACCO APYRON FUNCTIONS: Α) Power Mode: The device can adjust the power out- put from 1-75 watts B) Bypass Mode: Bypass Mode : In this mode the de- vice’s electronic board is bypassed and all the available battery’s voltage and current is provided to the atomizer.
- Page 6 PCB and wiring DEVICE USE AND PREPARATION: In order to activate the device, press five (5) consecutive times the fire button. The Screen will illuminate and the NOBACCO APYRON logo will appear. Your device is now turned on.
- Page 7 To deactivate the device press five (5) consecutive times the fire button. On the Screen the message “NOBACCO APYRON” will appear and the device will turn off. DEPENDING ON THE TYPE OF THE ATOMIZER’S COIL HEAD CHOOSE ONE OF THE FOLLOWING MODES (A/B/...
- Page 8 Product manu al Β) Bypass mode In this mode the device’s electronic board is bypassed and all the available battery’s voltage and current is pro- vided to the atomizer. It is recommended that the particular function is only used by experienced users who are already accustomed with the use of Mechanical MODS.
- Page 9 ΕΝ you find your preferred setting. Changing between dial and numerical display: While in Clock Mode, press the fire button three (3) consecutive times. The word “Time” will start blinking. Press the (-) button and the date (numerical display) or the hand set (dial display) will blink.
- Page 10 Product manu al If you are unfamiliar with the type of the coil head you intend to use, please read the manual of the atomizer. CAUTION: Using different type of coil head from the one supported on each Temp mode (Ni, Ti, SS316) may cause damage to the device and atomizer.
- Page 11 ΕΝ Ε) TCR mode (M1, M2, M3) This mode allows you to manually change the Tempera- ture Coefficient of Resistance (=T.C.R.) of the coil head of your atomizer, depending on the type of wire it uses. If you are not aware of the T.C.R. of the wire you intend to use, please find out more information about the T.C.R first and then proceed to any further action.
- Page 12 Product manu al Input the correct T.C.R. value using the +,- buttons. The range in each memory is 1-1000. CAUTION: Using different T.C.R. value than the one of the wire may result in malfunction of the device and the atomizer. Warranty is void due to misuse.
- Page 13 ΕΝ Your device can auto detect the value of the atomizer’s re- sistance. If it detects a difference greater than 0.05 ohms, while in Temp Modes, the device prompts you to choose if there is a new coil attached with following message: Choose new coil by pressing the (+) button, if you are using a different coil/atomizer than the one before the message appeared or same coil by pressing (-) if it is the...
-
Page 14: Supplementary Functions
Product manu al until the last indicator starts to flash. By pressing the (+) button you change through the indications. *Note: The manufacturer makes extra quality control testing on the device before packing. Potentially other indications than zero, in PUFF/TIME counters, while the initial activation of the device, are a result of the quality control testing. - Page 15 ΕΝ levels of difficulty are available (EASY-NORMAL-HARD) or you can exit by pressing the EXIT sign. Note: You cannot vape while in Game Mode. Logo: With the device powered on simulta- neously press the fire and (+) button to enter SCREEN mode. Press the (+) button until you enter LOGO mode.
- Page 16 Product manu al Note: If you wish to carry the device in a bag/suitcase, please turn it off for safety reasons. Your device has a ten (10) seconds cut off system for protection of the at- omizer and the battery from prolonged use. Screen Protection With the device powered on, simultaneously press the fire and (+) button to enter SCREEN mode.
- Page 17 ΕΝ Weak Battery Alert: Battery volts during usage drop below 2.9V. The device regulates the wattage to protect the battery. Αtomizer Low Alert: The atomizer has a resistance that is below the minimum specifications of the device. Please, replace with one that is within the specification range.
-
Page 18: Charging Your Device
Stop using the device if the automatic shut down sys- tem fails. CHARGING YOUR DEVICE Connect NOBACCO APYRON with the supplied USB cable to a USB input or a wall adapter with USB output. Once your device is charged, the charging indicator ( ) will dis- appear. - Page 19 • Do not pierce or in any way damage the device hous- ing. If the device housing is damaged in any way, di- rectly contact NOBACCO company. • If you are not planning to use the device for a long period of time, fully charge the battery and discon- nect the atomizer.
- Page 20 For more information about the warranty peri- od, please visit the product’s official webpage at www. nobacco.gr or ask your local reseller. NOBACCO COMPANY CANNOT BE HELD RESPONSIBLE FOR DAMAGES THAT MAY OCCUR DUE TO INAPPROPRIATE USE OF THE DEVICE OR INCORRECT COMPLIANCE WITH THE...
- Page 21 www.nobacco.gr...