Tahmazo T30 V.2 Additional Instruction Manual

T30
V .2
d i g i t a l c h a r g e r , d i s c h a r g e r a n d c y c l e r
A D D I T I O N A L I N S T R U C T I O N M A N U A L
T30 V.2
Additional Instruction Manual for LiFePo
Congratulations! You have bought the newly upgraded Tahmazo T30 V.2 Charger.
The T30 V.2 charger is packed with more capabilities to bring you greater value.
This additional instruction manual highlights the additional features
and capabilities of the Tahmazo T30 V.2.
T30 V.2
Specifications:
Description
Input voltage
11-15V
Battery type
1-30 cells NiCd & NiMH batteries
1-12 Lithium Polymer batteries
1-12 Lithium Iron Phosphate batteries (LiFePo
1-12 cells Lead-Acid batteries
Charge current
0.1 – 10.0A Adjustable
or up to 2C charge for Lithium Polymer or LiFePo
Charge method
Automatic, Normal, Linear and Reflex
Charge termination
Peak detection & zero delta V for NiCd & NiMH batteries
Constant-current/Constant Voltage for Lithium Polymer/
Lead-Acid/ Lithium Iron Phosphate batteries
Delta peak sensitivity
0-25mV adjustable
Trickle charge current 0-500mAH only for NiCd and NiMH batteries
Discharge current 0.1 – 5.0A adjustable
Discharge cutoff voltage
0.1 – 1.1 per cell for NiCd & NiMH batteries
2.5 – 3.7V per cell for Lithium Polymer batteries
2.9 – 3.3V per cell for LiFePo
4
Temperature cutoff
10 – 65ºC (50 – 150ºF)
Cycle count 1 – 10 cycles adjustable
Cycle cool-off delay 1 – 30minutes adjustable
Battery memories
10 battery memories
Display type
LCD with backlight
Dimension
156.5 x 143 x 55mm
Weight
740g
T30
V .2
d i g i t a l c h a r g e r , d i s c h a r g e r a n d c y c l e r
(A123) and LiPo
4
)
4
4
T 3 0 V . 2 I N S T R U C T I O N M A N U A L