Appliance Function - Beghelli LOGICA Instructions For Use & Installation

INDEX
• WHAT IS THE BEGHELLI LOGICA CONTROL UNIT •

• APPLIANCE FUNCTION

•
Wiring diagram
Groups and scenes
Menu
Password
Initial menu
"Activate scene" menu 1
"Light" menu 2
"Maintenance" menu 3
emergency function and management 3-2
error status 3-3
test management 3-4
lamp management 3-5
group management 3-6
control unit management 3-7
configuration management 3-8
"status MSG" menu 4
• SPECIFICATIONS
•
• WARNINGS / WARRANTIES
•
INDEX
2
WHA T IS THE BEGHELLI LOGICA CONTROL UNIT
WHA T IS THE BEGHELLI LOGICA CONTROL UNIT
The Logica control unit has been designed to dialogue with different com-
munication protocols. It enables the simultaneous management of both ligh-
ting and emergency lighting appliances. As well as the various functions
dedicated to testing and controlling emergency lighting, the Logica control
3
page
unit can command individual appliances or groups of lamps using the DALI
protocol, the international protocol that complies with IEC standard 60929.
3
The control unit also allows the creation of customised "scenes" for controlling
page
the type of lighting according to the varying lighting requirements at different
4
page
times of the day. It is also possible to adjust the brightness using a dimmer
5
page
for single appliances or groups, even when fitted with a timer or connected
5
to light sensors, which makes it possible to light rooms or areas in the most
page
similar way to natural sunlight (biodynamic lighting).
6
page
The control unit is composed of a keyboard+display for all user operations,
6
page
four programmable switches for light activation, an RS485 input for remote
6
page
connection and the DALI-compatible bus input for managing the system.
7
page
The control unit houses the bus' built-in feeder and can autonomously mana-
10 ge a complete system comprising 128 appliances without requiring further
page
equipment.
11
page
If the local switches are used the normally open buttons must be employed.
12
page
13
page
14
page
16
page
17
page
19
page
19
page
The control unit manages and controls the status of the programmed applian-
20
ces, controls routine tests according to the modes set by the user and can
page
perform a vast series of manual operations that can be selected from a series
of menus accessible from the keyboard.
20
page
APPLIANCE FUNCTION
APPLIANCE FUNCTION
3