Troubleshooting; Specifications - RocketFish RF-500WPS2 User Manual

Starting your computer
To start your computer:
Turn on the power supply by setting the power switch on the power
1
supply to the "I" (on) position.
Turn on your computer by pressing the power button on the front of
2
your computer.

Troubleshooting

If the power supply fails to function properly, check the following
before returning it for repair:
• Make sure that the power cord is plugged correctly into an AC power
outlet and into the power supply.
• Make sure that the power switch on the power supply is switched to the
"I" (on) position.
• Make sure that all power connectors are properly connected to all
components.

Specifications

Input voltage
Input frequency
Overcurrent protection
Active PFC
Output
Rated wattage
Peak wattage
Minimum: 90 V
Normal: 100 V ~ 240 V
Maximum: 265 V
Minimum: 47 Hz
Maximum: 63 Hz
Input fuse
Power factor: equal to or greater than 0.99 @115V/60 Hz full load
+3.3V Maximum load 18.0 A
+5 V Maximum load 18.0 A
+12 V1 Maximum load 18.0 A
+12 V2 Maximum load 18.0 A
-12 V Maximum load 0.3 A
+5 VSB Maximum load 2.5 A
Note: +3.3 V and +5 V total output not to exceed 130 W
+12 V1 and +12V2, combined output not to exceed 36A
500 W
600 W
Minimum load 0.5 A
Minimum load 0.5 A
Minimum load 1.0 A
Minimum load 1.0 A
Minimum load 0.0 A
Minimum load 0.0 A
RF-500WPS2 9