RocketFish RF-WTRMS User Manual page 11

When you use the mouse, other wireless
devices work more slowly or fail temporarily.
• The mouse may cause interference with any cordless,
radio-based device that operates at 27 MHz, such as a
telephone, baby monitor, or toy. To reduce interference,
move the mouse's receiver and the base unit of the
affected device as far away from each other as possible.
The response time of the mouse is slow or the
mouse intermittently stops working
• Increase the distance between the mouse's receiver and
the rest of your computer equipment.
• Increase the distance between the mouse's receiver and
the base units of other wireless devices.
• Turn off any wireless devices and their base units that are
near the mouse's receiver.
• If you are using the mouse on a metal surface, move it
and the receiver to a non-metal surface. Metals such as
iron, aluminum, or copper shield the radio frequency
transmission and may slow down the mouse's response
time or cause the mouse to fail temporarily.
You can't use the mouse while another RF
mouse is in use
• Reset the identification code by re-linking the receiver
and mouse. For instructions, see "Connecting the
receiver to the computer" on page 6.
RF-WTRMS
11