Select Appropriate Support Configuration; Locate Two Independent Power Outlets; Insert Items For Heat Treatment; Wireless Thermometer Setup - ZappBug Oven 2 Owner's Manual

Use & Operation

3. Select Appropriate Support Configuration

The ZappBug Oven 2's unique and modular support system is designed to
accommodate a wide range of items. Support blocks allow for ventilation
around rigid, heavy items such as luggage and small furniture. A combination
of Support Blocks and the Support Net allow for ventilation around loose items
such as books and clothing. Select the appropriate support configuration for
your items as shown below. It is critical that air is allowed to flow freely around
the items you are heat treating.
Support Blocks

4. Locate Two Independent Power Outlets

NOTE: Each heating unit must be powered from it's own circuit. Typical residential
and commercial buildings have one circuit per room. Use the included extension
cord to reach outlets in other rooms (where necessary).
One power extension cord is included in each ZappBug Oven 2.
heating unit directly into a nearby electrical outlet.
Locate an electrical outlet in another room or area that operates on a separate
electrical circuit. Typically, each room will have it's own independent electrical
circuit. Use the included power extension cord to connect the remaining heating
unit to this separate electrical outlet.
©2014-2018 ZappBug. All rights reserved. Product specifications subject to change.
(continued)
Support Net
Attach all Toggles of Support
Net in the Oven 2
TM
Use & Operation

5. Insert Items For Heat Treatment

Place items inside the Oven 2
adequate airflow, items should not touch walls or ceiling of the Oven 2
wireless thermometer probe inside deepest (most insulated) location in items
being treated. After that, zip the top cover closed.
Hint: Always open luggage and "fluff" items to ensure air circulation. If items are
densely packed, they take longer to heat.

6. Wireless Thermometer Setup

The ZappBug Oven 2
remote probe, pictured below.
Plug one Thermometer Base Station
10
(continued)
on top of Support Blocks/Support Net. To ensure
TM
comes with an included thermometer base station and a
TM
Thermometer Probes
Note: Setup Thermometer
Base station first
To learn more, please visit us at ZappBug.com
. Place
TM
11