Components Included; Use & Operation; Unfold Oven; Connect Heating Unit - ZappBug Oven 2 Owner's Manual

Components Included

The Following components are required for proper use of this product. If you did
not receive all of the components listed below, contact ZappBug immediately
(email: support@ZappBug.com).
representations below.
Support Block
X4
Support Net
X1
One-Touch Timer
X2
Extension Cord
©2014-2018 ZappBug. All rights reserved. Product specifications subject to change.
Some components may appear different from the
ZappBug Heating Unit
TM
X2
Carry Bag & Folding Oven
X1
Wireless Thermometer
X1
Use & Operation
1. Unfold The Oven
2. Connect Heating Units (X2)
X1
Locate Ventilation Tube
Note: It is normal for small gaps to appear between the textured side of the
Heating Unit and the Ventilation Tube. Bed bugs will not escape through these
gaps if the Heating Unit is on. Bed bugs experience thermal shock and are not
capable of moving toward the Heating Unit. Always ensure that Heating Units
are on when placing potentially infested items inside the ZappBug Oven 2
8
Note:
It is normal for one side of the oven
to appear warped. This allows the oven to
easily fold and does not affect functionality.
If warping appears excessive, shake oven to
ensure that each side panel is fully extended.
Place Base of Heating Unit Stretch Tube Around
In Tube
(Observe "Do Not Cover"
To learn more, please visit us at ZappBug.com
Heating Unit
markings)
.
TM
9