Table of Contents
Advertisement
DIGITAL DISPLAY CODES
5
FAULT - Brake fault
FAULT - Motor overcurrent fault
FAULT - Battery flat - Audible alarm
The battery level is really low
FAULT - Final limit overrun
FAULT - OSG switch
FATAL ERROR CODES
LIFT WILL NOT OPERATE
Acorn Stairlifts User Manual
• Reset the stairlift
(power off for 30
seconds)
• Drive the stairlift
to a charge point,
and leave to charge
for one hour
• If not resolved,
contact your
authorized Acorn
dealer for
assistance
• Reset the stairlift
(power off for 30
seconds)
• If not resolved,
contact your
authorized Acorn
dealer for
assistance
• Press the arm
switch control
or the remote
control once to
stop the alarm.
• With E7 on display,
bring the unit
down to the
nearest charging
station and
recharge the
batteries.
• Hand wind the
stairlift up OR down
(see page 20)
• If not resolved,
contact your
authorized Acorn
dealer for
assistance
• Hand wind the lift
UP to reset the OSG
(see page 20)
27
Hide quick links:
Advertisement
Table of Contents
