Rails - Acorn Superglide 130 User Manual

CARE AND MAINTENANCE
REMOTE CONTROLS
As previously described on page 12, there may be occasions when the remote
control handsets* will lose programming due to outside interference. If this happens,
you can reset the remote control by parking the lift on its charge point.. Then remove
the key from its location so that the digital display is showing 'E9'.
Press the lower safety edge on the carriage and,
at the same time, press the DOWN button on the remote
control.
When the key is inserted back into its location
and turn right (clock wise), the remote control
handset will be correctly programmed.
The remote controls work by using an
infrared light source. This naturally
occurring light source can also be
emitted by certain types of low
energy bulbs. If it is found that such
a bulb is causing interference with
the remote controls, it is
recommended that it be changed
to a standard one.
IT IS RECOMMENDED THAT THE
REMOTE CONTROL BATTERIES
ARE REPLACED ANNUALLY.
*Remote handset may vary from that shown

RAILS

It is recommended that the rail should be cleaned on a weekly basis. This should
be done with a dry cloth, and you can use simple household polish. Under no
circumstances should you use a damp cloth with abrasive cleaner. Failure to
clean the track on a regular basis will lead to a build up of dust on the internal rollers
of the stairlift, which will in turn leave black marks; and in some instances will leave a
residue which can look similar to metal shavings.
It is also recommended that the steel-toothed rack, mounted on the rail itself, should
be vacuumed out on a regular basis.
Acorn Stairlifts User Manual
21